Design of an ultra low power third order continuous time current mode ΣΔ modulator for WLAN applications.
← Research streamA third-order continuous-time current-mode ΣΔ modulator for WLAN 802.11b applications is presented. The modulator is reported to achieve >60 dB dynamic range for 20 MHz signal bandwidth at OSR=10 while consuming 914 μW from a 1.8 V supply, with a calculated F…
Study snapshot
Abstract
This paper presents a third order continuous time current mode ΣΔ modulator for WLAN 802.11b standard applications. The proposed circuit utilized feedback architecture with scaled and optimized DAC coefficients. At circuit level, we propose a modified cascade current mirror integrator with reduced input impedance which results in more bandwidth and linearity and hence improves the dynamic range. Also, a very fast and precise novel dynamic latch based current comparator is introduced with low power consumption. This ultra fast comparator facilitates increasing the sampling rate toward GHz frequencies. The modulator exhibits dynamic range of more than 60 dB for 20 MHz signal bandwidth and OSR of 10 while consuming only 914 μW from 1.8 V power supply. The FoM of the modulator is calculated from two different methods, and excellent performance is achieved for proposed modulator.
AI evidence extraction
Structured fields below were generated from the paper’s abstract and metadata to make the evidence easier to inspect. Automated extraction may be incomplete or incorrect; verify important details against the original paper.
Main findings
A third-order continuous-time current-mode ΣΔ modulator for WLAN 802.11b applications is presented. The modulator is reported to achieve >60 dB dynamic range for 20 MHz signal bandwidth at OSR=10 while consuming 914 μW from a 1.8 V supply, with a calculated FoM indicating excellent performance.
Outcomes measured
- Modulator dynamic range
- Signal bandwidth (20 MHz)
- Oversampling ratio (OSR=10)
- Power consumption (914 μW at 1.8 V)
- Figure of merit (FoM)
View raw extracted JSON
{
"study_type": "engineering",
"exposure": {
"band": null,
"source": null,
"frequency_mhz": null,
"sar_wkg": null,
"duration": null
},
"population": null,
"sample_size": null,
"outcomes": [
"Modulator dynamic range",
"Signal bandwidth (20 MHz)",
"Oversampling ratio (OSR=10)",
"Power consumption (914 μW at 1.8 V)",
"Figure of merit (FoM)"
],
"main_findings": "A third-order continuous-time current-mode ΣΔ modulator for WLAN 802.11b applications is presented. The modulator is reported to achieve >60 dB dynamic range for 20 MHz signal bandwidth at OSR=10 while consuming 914 μW from a 1.8 V supply, with a calculated FoM indicating excellent performance.",
"effect_direction": "unclear",
"limitations": [],
"evidence_strength": "insufficient",
"confidence": 0.78,
"peer_reviewed_likely": "yes",
"keywords": [
"sigma-delta modulator",
"continuous-time",
"current-mode",
"WLAN",
"802.11b",
"DAC coefficients",
"current mirror integrator",
"dynamic latch comparator",
"low power",
"GHz sampling rate"
],
"suggested_hubs": []
}AI-extracted fields are generated from the abstract and metadata and may be incomplete or incorrect. This material is for informational purposes and is not medical advice.
Identifiers and source
DOI: 10.1016/j.jare.2013.06.003
PubMed: 25685504
Related papers
- Methodology to determine threshold distance for estimating main electromagnetic exposure in wireless local area network (WiFi) 2022
- Healthy disorders by WLAN-exposure 2022
- Low-SAR Antenna Design and Implementation for Mobile Phone Applications 2021
- Artificial EMG (electromyogram) by WLAN exposure 2021
- Artificial EMG (Electromyogram) by WLAN-Exposure 2021
- Artificial EMG (electromyogram) by WLAN exposure 2021